Multiphase Pump Skid
Innovative solutions to lead the future of green energy
Multiphase Pump Skid Solution
Innovative production enhancement and energy saving solutions
01 Overview
As a high-quality, clean, and efficient energy source, natural gas has been applied in an increasingly wider range of scenarios. Natural gas and associated gas in oil fields are important sources of natural gas. The main components of associated gas include light hydrocarbons, carbon monoxide, water, hydrogen sulfide and other non-hydrocarbon compounds. Due to limitations in technological development and geographical conditions, the traditional associated gas treatment measure was to directly vent associated gas into the atmosphere and burn it with flares, leading to both energy waste and environmental pollution. Currently, associated gas recovery process consists of constant pressure valve, well group gas compressor, and multiphase pump. However, due to the unstable performance of recovery equipment and low gas gathering efficiency, associated gas from well groups and stations cannot be effectively recovered.
To address these issues, we have developed multiphase pump skid.
One-Stop Pump Skid Transportation


3D model of the multiphase pump skid
02 Structure
03 Advantages
Customer on-site verification: stable, efficient, trustworthy
Cold Transportation, Reduce OPEX
Enhance the liquidity of multiphase medium by boosting pressure in low-temperature environments; realize low-temperature non heating or low-temperature heating transportation.
One-stop Transportation, Save Investment
Directly transport multiphase medium from deep-well pumps at well site to central processing facility, replace booster station by multiphase pump skid, and greatly reduce construction cost of booster stations and transmission pipelines.
Reduce Wellhead Back Pressure
Significantly reduce wellhead back pressure and load of pumping unit; realize energy conservation and consumption reduction.
100% Recovery of Associated Gas
Improve utilization of light hydrocarbons and casing gas; improve the economic benefits of crude oil exploitation; protect environment.
Maximum 100% Gas Volume Fraction
Pump with compressor function ensure stable and reliable operation under extreme gas-liquid ratio conditions, maximum 100% gas volume fraction.
Multiphase Transportation
Multiphase medium transportation of oil, associated gas, water, and other substances.
04 Parameter
Technical Specifications
Model | SHHSQ-288 | SHHSQ-480 | SHHSQ-960 | SHHSQ-1440 |
Oil Flow(m³/d) | 288 | 480 | 960 | 1440 |
Inlet Pressure(MPa) | <0.4 | <0.4 | <0.4 | <0.4 |
Outlet Pressure(MPa) | 4-5 | 4-5 | 4-5 | 4-5 |
Gas-Oil Ratio (Nm³/t) | <100 | <100 | <100 | <100 |
Pipeline Flange (cm) | DN50-DN60 | DN50-DN60 | DN50-DN60 | DN50-DN60 |
Dimension(m) | 4.5*2.1 | 4.5*2.1 | 4.5*2.1 | 4.5*2.1 |
Multiphase Turbulent Pump(Set) | 1 active+1 standby | 1 active+1 standby | 1 active+1 standby | 1 active+1 standby |
Filtration System (Set) | 1 | 1 | 1 | 1 |
High-Pressure Manual Valve (Pcs) | 5 | 5 | 5 | 5 |
Low-Pressure Manual Valve (Pcs) | 6 | 6 | 6 | 6 |
Pressure Sensor (Pcs) | 2 | 2 | 2 | 2 |
Temperature Sensor (Pcs) | 2 | 2 | 2 | 2 |
Bypass Motorized Valve (Pcs) | 1 | 1 | 1 | 1 |
Insulation and Anti-corrosion System (Set) | 1 | 1 | 1 | 1 |
High-Voltage Electrical System (Set) | 1 | 1 | 1 | 1 |
Low-Voltage Electrical System (Set) | 1 | 1 | 1 | 1 |
Explosion-Proof Control Cabinet (Set) | 1 | 1 | 1 | 1 |
Explosion-Proof Motor (kW) | 11.5-18.5 | 11.5-18.5 | 11.5-18.5 | 11.5-18.5 |
Explosion-Proof Rating | ExeII BT4 | ExeII BT4 | ExeII BT4 | ExeII BT4 |
Ingress Protection | IP65 | IP65 | IP65 | IP65 |
Control System Module | SCADA | SCADA | SCADA | SCADA |
Automatic Variable Frequency Control System | PLC | PLC | PLC | PLC |
Intelligent Remote Control System | RTU | RTU | RTU | RTU |
Signal Detection Accuracy System (Grade) | 0.25 | 0.25 | 0.25 | 0.25 |
Power Supply and Distribution System(V) | 380 | 380 | 380 | 380 |
Environment temperature(℃) | -30-80 | -30-80 | -30-80 | -30-80 |